No-Drill Mount Bracket, Long
(542 reviews)
Price: $20.61
In Stock
No-Drill Mount Bracket, Long
Item # 18136
Retail:$34.11
Our Price: $20.61
You Save: 40%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (542)
- Q & A (0)
- Photos
Tow Ready Accessories and Parts - 18136
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
Secures to the cross tube of your vehicle's hitch to provide a mounting point for your vehicle's wiring harness bracket. Installs with the included hose clamp.
Features:
- Provides a sturdy place to attach the vehicle-side wiring bracket to your vehicle
- Installs to the cross tube of your vehicle's hitch with the included hose clamp
Fits:
- Mounting Bracket 4-Pole Flat (#18144)
- Mounting Bracket for 4-, 5- and 6-Way Connectors (#118137)
- Mounting Bracket for 7-Way Standard Connectors (#18138)
- Mounting Bracket for 7-Way OEM Connectors (#PK12711U)
- Mounting Bracket for Wesbar 5-Pole Flat (#tr20046)
Note: Many wiring adapters, specifically the 4-pole to 7-and 4-pole adapters, include the connector-specific mounting bracket (piece 2 of 2).
118136 No-Drill Mount Bracket, Long
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
No-Drill Mount Bracket, Long - 18136
Average Customer Rating: 4.6 out of 5 stars (540 Customer Reviews)
Secures to the cross tube of your vehicle's hitch to provide a mounting point for your vehicle's wiring harness bracket. Installs with the included hose clamp.by: Waterwalkersff03/06/2024
2019 Outback Limited 3.6
Just completed installation of Echo stealth hitch, Curt 4 way T connector, 4 to 7 way universal trailer brake controller kit, and Redarc Liberty brake controller.
This was a fun and very straight forward project. The Etrailer videos were awesome.
I took my time and knocked it out a couple of hours over 3 days. Im recently retired so no rush.
While awaiting shipment I poked hole through rubber grommet inside engine bay. I then pushed a 3ft length of 1/4" drip irrigation tubing through to pull future brake controller wires into cabin. I had ordered the Curt 4 way T connector earlier so instalked that as well. Videos were great and made finding plug n play connection super fast and easy.
Once parts arrived, I instalked Echo hitch and universal 7 way adapter kit. I picked up a torque wrench at Harbor Freight for $30 which worked great. I needed one for tightening tugs anyway so it was great timing.
I ran the 7 way wiring down passanger side under plastic shield. It was easier than anticipated and virtually invisible. Most videos show mounting inline fuses near battery. With my 3.6 the passabger side was wide open so I opted to mount the fuses there. This required a trip to Home Depot for an additional 14 ft of 10 guage wire. This was used to run hot 2 wires from 40amp/29amp fuses to battery($9.00). Turns out that the irrigation tubing is the exact size for covering anchor bolts on inline fuse. Probably dont need them but keeps everything safe from accidental arching is crossed.
I taped together the white trailer brake wire running from back and the 20 amp output black wire from 20 amp fuse to the piece of drip tubing I previously pushed through gromnet. I added a touch of white grease and it slid through grommet like butter.
The final day I instalked Redarc controller. Installation is fairly straight forward especially after knocking out the dirty parts of install.
Honestly the most troublesome part of the entire project was identifying the cold brake pedal wire. These wires are minute. The key is having the right tools which I did not. Purchase a hook probe circuit tester and save yourself all the frustration. I watched many videos and there were multiple answers as to which wire is the correct wire. Dont guess or take soneones advice, verify. A hook probe tester like the instalkers use is worth $20. I ended up dropoing by my local uhaul that does custom hitch instalkations. Base labor price $60 which was totally worth it at that point. I saved a lit of $ DIY so I had the pro identify and connect controller to proper brakewure activated when pedal is pressed. I had it all open for him so he only charged me $20. Thank the Lord he was an honest cool guy.
After completing instalkation and powering up system the Redarc had no lights whatsoever. I calked Redarc and they had me check for power at black wire on input side, all good. I then disconbected both sides of controller, multi rmwire side and control knob side. After reinstalling the blue led indicator light fired up. Everything is back in place and working great. I dont have our trailer yet, but purchased a 4 way and 7 way tester and all systems are ready for launch!
I ended up mounting the control knob onto the fuse cover lid on left dashboard. This was just easy and simple. Added some tacky strips to hold cover securly.
This was a fun project and etrailer made it super easy. Items were delivered quickly and great quality. etrailer is my go to stop for everything towing.
by: Jon04/09/2024
Sorry Carol, I had to modify the long bracket in order for it to work on my 2020 Ford Edge Titanium.
by: William 05/12/2024
It was an excellent addition to the trailer hitch. It made mounting the plug nice. The only thing was that the clamp that they sent was a little too big for the tube on the trailer hitch probably originally set up for a square tube, but I had round tube on mine, but I had another clamp put it on hold the plug nice and secure great product
by: Chris 04/25/2024
You will need this part if you are mounting a wire harness to your hitch.
Mounts securely with stainless hose clamps.
by: Joseph 02/12/2024
Helped to install the 7 way connetor, the only issue I had was my hitch bar was curved this off sets the 7 way plug but does not impair the use of the plug with the wireless brake controller. Love etrailer and the products they distribute.
by: Jim in Florida12/13/2023
The most difficult part of installing this trailer wiring kit was removing all of the junk I accumulated in my rear compartment to access the connector harness.
Once I did it only took like 3 minutes to completely install and put the floor back in place.
It works flawlessly, but here's a little hint - do not allow your trailer 4-pin connector to be stored outside without a rubber insulating boot on ot to prevent corrosion or wasps from making a mud nest inside it. I use aluminum foil wrapped around in and dielectric grease.
Hope this helps.
by: Richard 03/07/2024
Paula was a great help. Very pleasant to work with. Answered all my questions about these items plus break controllers,wiring,and adapters. She even gave me her direct call back. Said if I had any questions don't hesitate to call. Shipping was fast. Great company to work with. Thanks again.
by: Ian 03/05/2024
Great service made appointment at garage to have mechanic install new hitch on our 2015 nissan frontier pickup.Thank you very much for your service you gave me.Ian
by: Ron12/22/2023
Package was placed inside box with hitch receiver. When I got it was opened and small screws and clamp were missing. Also the plate was bent from receiver bouncing around in the box. I made it work but was quite let down.
by: Len10/11/2023
Box is damage parts. Parts of the hitch broke through. There is some scratches and paint gloss. I haven’t taken a completely out of the box yet tomorrow I just installed and we’ll see if there’s any other damage.
by: Mitch10/02/2021
At 6 1/2 inches, the "long" mounting bracket is too long. The 3 1/2 "short" bracket is too short. I needed 5 1/2 length, so I used a hacksaw to cut the longer bracket and drilled new holes. Easier than I expected, about 15-20 minutes work. I've attached before photos showing the fine previous workmanship, along after photos of my remount.
by: Arthur 02/12/2024
Easy to install in area I choose that works best for my trailer.
by: Adam B.07/08/2017
The universal mounting bracket installed without a problem. My rounded hitch posed a slight problem for this model, though. I ended up placing a zip-tie to the backside of the bumper to try to keep it from falling down. Otherwise, it is still working great one year in even with deeper-than-average snow last winter.
by: Chuck10/13/2023
Strong and stable. I was doubtful that the single stainless steel worm gear clamp would provide a firm mount. Boy, was I wrong. Up against the square crossbar of the hitch and with the clamp properly tightened, the bracket is impressively stable. It holds the 4-pole flat wire connector at the perfect place. Away from road and trail hazards, but convenient to reach for safe, simple hook-up when coupling the trailer. Thick steel with a nice fit and finish.
by: Dave12/21/2023
Be sure you have a square shaped hitch. Won't work well with round.
by: Neal07/21/2022
The only thing about the stuff I purchased from e-trailer that I did not like is the mounting brackets! I had to bend it 90 degrees to make it work. Please fix this issue. Unfortunately, some paint came off when bending it, so 12 months later it is starting to rust (see photo). The bracket that the plug sits in is sloppy so the plug usually falls out when I unplug or plug the trailer in. PLEASE FIX!
By the way, the trailer hitch and harness I purchased from e-trailer is AWESOME.
by: Robert05/05/2022
The bracket assembly was packaged inside a larger box containing the trailer hitch that I ordered. The hitch box was damaged and the bracket was missing on the original delivery. I called etrailer customer service and they sent replacements immediately. I would strongly suggest packing the smaller items in a separate box to eliminate this issue. The bracket met all expectations and was thicker then expected. Customer Service, Ordering, delivery, and communication were outstanding from etrailer.
Rob L.
4/27/2023
No concerns, bracket is holding fine.
by: David10/19/2023
Extremely appreciative of the tech help I got from Phillip at etrailer
Knowledge was spot on with our vehicle and the products needed to install the hitch, wiring, and bracket.
by: Jeffrey05/08/2024
It was a perfect fit. Everything went together easily.
by: Jack05/22/2017
Good product. Installed it on 08 Odyssey Reese class lll trailer hitch. Make sure to get the 6.5" bracket when installing larger connectors such as 7 way in order to fit the wiring harness. I'm also impressed with the customer service.. very knowable, helpful and friendly. Looking forward doing business here again soon. Thanks Etrailer
by: Mark 04/01/2024
Great product and install.
by: Ian G.03/04/2017
Purchased this to support the receptacle in the 7-way ETBC7 kit for a 2010 Honda Odyssey. I was initially skeptical that it would grab securely onto a round hitch pipe (Hidden Hitch) but it does. In the picture, readers can see that I intentionally installed this 18136 bracket "upside down". There are two reasons: (1) Aftermarket hitch receivers ride fairly low on Odysseys and occasionally mine will scrape the road if there is a steep grade change. Not a big deal, but I did not want the ETBC7 receptacle to scrape the ground and be damaged. This way, the 18136 bracket might scrape, but the receptacle will be protected. (2) Mounting upside down also raises the ETBC7 about an inch, so that it is not hanging lower than the hitch receiver.
I also mounted the ETBC7's bracket "backwards". This sets the receptacle a tad inside the profile of the bumper, so that if a shopping cart or something hits the bumper it will be less likely to impact the receptacle.
Very pleased with this part, it's sturdier than it looks and gives the ETBC7 a solid platform when you can't or don't want to mount directly into the bumper of your vehicle.
by: Darryl08/08/2020
Works great. I had to cut it down to fit my Honda CRV with a grinder. After cutting it down, I recommend getting some black paint to keep it from rusting.
Victoria B.
8/10/2020
This mounting bracket is also available in a short length, part 18140.
Helpful Links
by: Wayne 06/14/2023
This heavy duty bracket was just what I needed to be able to attach my customer's 7-way trailer plug to the round tube hitch. I did need to put a 90 degree bend in this for proper placement. Came out looking great and very secure with the heavy duty clamp provided.
by: Rick B03/14/2015
I bought the long bracket since I planned on adding a couple of bends to it. The bracket is something like 12 ga. steel so I had a metal shop make the bends. The picture shows how it mounted on the 2-1/2 in. square tube crossmember. I was very pleased with the result. Just make sure you have adequate clearance for the square tube when you make the bends if you mount it this way. Otherwise you'll have to throw it away and start over.
25
541
Show More Reviews
See what our Experts say about this Tow Ready Accessories and Parts
- Will the No-Drill Bracket part # 18136 Work on a Round HitchYes the Tow Ready No-Drill Mount Bracket part # 18136 work great with round tube hitches. It is designed to flex around any shape solid object you want to mount it to.
view full answer... - Parts Needed To Tow a Trailer w/ Brakes w/ a 2024 Hyundai Tucson Congrats on the new vehicle. To tow a trailer with brakes with your 2024 Hyundai Tucson you will need the following parts: Trailer Hitch - etrailer Hitch item # e38KR 4-Way Connector - Curt T-Connector Vehicle Wiring Harness item # C59236 7-Way Connector - Universal Installation Kit for Trailer Brake Controller item # ETBC7 Wiring Harness Mount - No-Drill Mount Bracket item # 18136 Brake Controller - Redarc Tow-Pro Liberty Brake Controller item # RED24FR and Wiring Adapter item # RED69FR Ball...
view full answer... - Parts Needed to Tow a Trailer w/ Brakes w/ a 2024 Hyundai Santa CruzI would be happy to help you find a set up for your 2024 Hyundai Santa Cruz that will allow you to tow a trailer with brakes. You're going to need both a 4-way and 7-way connector because there isn't an aftermarket option to give you just the 7-way. You will also need a brake controller and a wiring adapter amongst other things that I have listed below. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C45FV. This will provide you with a 4-flat connector. The...
view full answer... - Recommended 7-Way and Brake Controller for a 2024 Jeep Grand Cherokee L w/out the Tow PackageTo install a 7-Way harness on your 2024 Jeep Grand Cherokee L without the towing package you will need two separate wiring harnesses because they don't make just one that'll do the job. That's why you're not seeing one. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C27BR. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you...
view full answer... - Recommended 7-Way Connector for a 2023 Subaru Ascent Yes, that is something we carry and I would be happy to help you. To install a 7-Way harness on your 2023 Subaru Ascent you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C56040. This custom-fit T-connector plugs into your Subaru's wiring harness, which is located behind the interior trim panel in your rear cargo area. This will provide you with a 4-flat connector. The...
view full answer... - Recommended Hitch for a 2024 Ford Bronco For your 2024 Ford Bronco, I recommend the Curt Trailer Hitch item # C76WR. This hitch is custom fit and bolts to your Bronco with included hardware. This is a class III hitch with a 2" receiver. It has a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight. I really like this hitch because of its super easy installation method of bolting to your Bronco's bumper with four bolts. I have linked an installation video below to help you get this hitch set up. If you are planning...
view full answer... - Recommended Hitch for a 2023 Jeep Grand Cherokee LYes, we do. It is the Curt Hitch item # C96NR. This hitch is custom fit and bolts to your 2023 Jeep Grand Cherokee L with included hardware. I really like this hitch because when you are not towing it can be completely hidden behind your rear bumper. I have attached a couple of pictures below that will show you what this hitch looks like once installed. If you are planning on towing you will also need a wiring harness item # C27BR and a ball mount kit item # C45534. This wiring harness...
view full answer...
- Recommended 7-Way Connector for a 2023 Jeep Grand Cherokee LTo install a 7-Way harness on your 2023 Jeep Grand Cherokee L you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C27BR. This custom-fit T-connector plugs into your Jeep's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake...
view full answer... - How to Add a 7-Way Connector to a 2023 Toyota Highlander w/ the Factory Tow PackageTo install a 7-Way harness on your 2023 Toyota Highlander with the factory tow package, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Tekonsha T-One Vehicle Wiring Harness item # TK74FR. This custom-fit T-connector plugs into your Toyota's wiring harness, which is located behind the rear bumper on the driver's side. This will provide you with a 4-flat connector. The second harness you will need is...
view full answer... - Recommended 7-Way Connector for a 2023 Mazda CX-5 To install a 7-Way harness on your 2023 Mazda CX-5 you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C45FV. This custom-fit T-connector plugs into your Mazda's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller...
view full answer... - Can I Install Both a Flat Towing Wiring Harness and a 4-Way Connector on a 2018 Jeep Wrangler JK?Yes, so long as you don't try to use both of them at the same time. The Curt T-Connector Vehicle Wiring Harness item # C55124 will work as a 4-flat connector and plugs into your Jeep's existing wiring. If you try to flat tow your 2018 Jeep Wrangler JK with say a bike rack on the back or a cargo carrier that has lights on it then the 4-flat connector will not work, only the Hopkins item # HM56200. The Curt item # C55124 is confirmed to fit the 2018 Jeep Wrangler JK's without the towing...
view full answer... - Recommended 7-Way Connector for a 2023 Subaru Outback Wagon To install a 7-Way harness on your 2023 Subaru Outback you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C56040. This custom-fit T-connector plugs into your Subaru's wiring harness, which is in your rear cargo area. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller...
view full answer... - Parts Needed to Install 7-Way Wiring on a 2014 Audi Q5While there are no plug and play type 7-Way connectors for your 2014 Audi Q5, we still have the parts you need to get a 7-Way installed so you can tow your trailer. To start off you need the 4-Way and for that I recommend going with the Tekonsha ZCI # 119250KIT. The ZCI uses special connectors that clip over your OEM wiring and prevent you from having to cut into any OEM wiring. Both options do require that a 12V power wire be run to your vehicle battery to power the trailer lights. From...
view full answer... - Recommended 4-Way Wiring Harness for a 2016 Chevy Trax LS I checked with our vendors and the only custom fit wiring harness for a 2016 Chevy Trax is the T-One Vehicle Wiring Harness item # 118659 you were looking at but it doesn't fit the LS model. As much as you don't want to you'll have to use a universal harness to add a 4-way connector to your Trax LS. I recommend the ZCI Circuit Protected Vehicle Wiring Harness item # 119250KIT. This universal harness requires no cutting and uses clamps on the factory wiring harness to signal your trailer...
view full answer... - Recommended Mounting Bracket for a 4-Way Wiring Harnesses I recommend using the No-Drill Mount Bracket item # 18136 and the item # C42CR to secure a 4-way connector to your hitch. This will put the connector in a easy to reach spot and prevent the risk of it falling onto the road. The etrailer Hitch item # e45ZR, you were looking at, is confirmed to fit the 2022 Kia Telluride.
view full answer... - Recommended 7-Way Harness for a 2023 Volvo XC90To install a 7-Way harness on your 2023 Volvo XC90, you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt Vehicle Wiring Harness item # C59236. This is a universal harness that has to be spliced into existing wiring. There is no custom fit option. It will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller item # ETBC7. The...
view full answer... - Recommended 7-Way Connector for a 2023 Mazda CX-50To install a 7-Way harness on your 2023 Mazda CX-50 you will need two separate wiring harnesses because they don't make just one that'll do the job. The first harness you'll need is the Curt T-Connector Vehicle Wiring Harness item # C45FV. This custom-fit T-connector plugs into your Mazda's wiring harness, which is located behind the tail lights. This will provide you with a 4-flat connector. The second harness you will need is the Universal Installation Kit for Trailer Brake Controller...
view full answer... - Recommended Hitch for a 2023 Mazda CX-9The best hitch for your 2023 Mazda CX-9 is the Draw-Tite Trailer Hitch item # 76020. This hitch is custom fit and bolts to your Mazda with included hardware. This is a class III hitch with a 2" receiver. It has a 4,500 lbs towing capacity and a 675 lbs maximum tongue weight. I really like this hitch because the crosstube mounts behind the rear bumper cover leaving only the 2" receiver visible. This not only looks better but it also helps with ground clearance. I have attached a couple...
view full answer...
- Recommended Hitch for a 2023 Toyota Sienna The best hitch for your 2023 Toyota Sienna is the etrailer Hitch item # e56RR. This 2" hitch is custom fit and bolts to your Sienna with included hardware. I have attached a couple of pictures below along with an installation video we did on a 2022 Sienna so you can get an idea of what this hitch will look like once installed on your 2023. If you are planning on towing you will also need a wiring harness item # C59236 and a ball mount kit item # C45534. I also recommend using the No-Drill...
view full answer...
- 7-Way Trailer Connector For a 2023 Nissan Frontier The T-One Vehicle Wiring Harness with 7-Way Trailer Connector # 118266 will provide you with a 7-way connector in your 2023 Nissan Frontier with no tow package. I recommend adding the Hopkins Universal Mounting Bracket for 7-Way # HM48625 and the No-Drill Mount Bracket # 18136 for mounting the 7-way. If you ever need a 4-way connector, you can use the Pollak 7 Pole to 4 Way Connector Adapter # PK12716 which will adapt the 7-way to a 4-way.
view full answer... - Installing a Brake Controller on 2016 Subaru Outback Wagon with Set-Up for Towing Pop-Up CamperYes, we can definitely help with this. To tow a pop-up camper or any trailer with electric brakes you will need the 7-way RV style connector for your 2016 Subaru Outback Wagon. If you do not already have one installed we have everything needed to do so and plenty of help articles and install videos too. You will need: - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118467 - Universal Installation Kit for Trailer Brake Controller, # ETBC7 - No-Drill Mount Bracket,...
view full answer... - Is It OK To Bend No-Drill Mounting Bracket 18136 To Clear Rear Bumper?Absolutely! It is not uncommon to have to bend the Long No-Drill Mounting Bracket # 18136 to make it where you can mounting a 7-way connector. There is no issue with mounting the bracket vertically and bending it a bit to allow your 7-way connector mounting bracket to fit. I included a video of the # 18136 for you to take a look at.
view full answer... - Trailer Hitch and Wiring Harness Recommendation for 2019 Nissan Titan Without Tow PackageI recommend using the Curt Trailer Hitch Receiver # C13304 for your 2019 Nissan Titan because we have found that the Curt hitches tend to have better welds and a thicker powder coat which means they will last longer than other options. For wiring you just need the wiring kit # N40975 as well as the mounting bracket # 18136. If you check out the attached installation video of the 2017 Nissan Titan you can see that the wiring harness you need is on the passenger side of the vehicle near...
view full answer... - Trailer Wiring Harness Needed to Add 7-Way Connector to 2019 Toyota HighlanderWhen it comes to supplying power to the brake lights to your trailer your 2019 Toyota Highlander actually has an existing connector so you don't have to splice into the OEM wiring on your vehicle. To add a 4-Way connector for your basic trailer lights you either need the T-Connector Kit # 56042 if you have the factory tow package or the T-Connector Kit # C56217 if you don't have the factory tow package. If you're referring to controlling the brakes on your trailer then you will actually...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video by:
Andrew K
Expert Research:
Michael H
Expert Research:
Jeff D
Test Fit:
Nicholas E
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Hannah L
Installed by:
Robert C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Laura E.
7/10/2017
Great idea, Adam! As Plato said, necessity is the mother of invention, and you definitely problem-solved on this one! Since your pictures show a 4-way and 7-way connector, you could also use the Curt Easy Mount Bracket for 2-inch hitches Item C58000. This slips over your Curt 2-inch receiver and does not require drilling, either. Thanks again for sharing!
Helpful Links
Accessories-and-Parts/Curt/C58000.html